|
Marking
The correct marking and labeling of every package containing dangerous
goods is very important for a safe transportation. The marks and label complies with the following
general information.
- Identify the package content
- Identify the package design and specifications.
- Shows handling and warehousing information .
- Identify the type of hazard .
The shipper is responsible for all necessary marking and labeling of each
package of dangerous goods, in compliance with the current IATA and operator regulations. Each
package must be of such a size that there is adequate space to affix required markings and
labels.
All markings must be readily visible, legible and so placed
that they are not covered or obscured by any part. Markings must be durable printed or otherwise
marked on, or affixed on the package to provide adequate permanency.
It is recommended that package and overpack use markings
should be at least 12mm. high, except for packages of 30 liters or 30 kg of capacity or less when
they have minimum height of 6 mm.
English must be used in addition to the language, which may be
required, by the state of origin.
Types of Marking
Marking for packages are of two types:
- Marking which identify the design or specification of a packaging: These
markings are normally applied by the packaging manufacturer, but are still ultimately the
responsibility of the shipper. This type of marking must be applied every time that a UN type
packaging is used.
- Marking which identify the use of a particular packaging for a particular
shipment: this type of marks must show the following:
- Indication of Contents.
- United Nations ( UN ) number.
- Complete name and address of the shipper.
- Complete name and address of the consignee.
If you need additional information please
contact us
|
